![]() The dual port super muffler flows well if you, widen to match the ex port, drill out the baffle, and open up the outlets as large as you can and still keep the screen. This helps getting the T27 torx bit to the bolt heads I also use an old chain file to open up the access holes in the cylinder fins. If you don't do this and/or turn down the bolt heads the bolts will screw in at an angle and cross thread the case. I take the dremel and also grind a bit where the bolt heads seat so the bolts can be flush when screwed into the case. You can slot the holes in the magnum cylinder using a dremel or a file. The conversions to 038M I've done have used super cases and this was not an issue. The stihl service manual mentions that some metal may need to be removed on a 038 case to put a super cylinder on it (so it will fit flat on the case). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |